3D Printing

You don't need to be in costume to post in this cosplay forum... but sometimes it helps.
Post Reply
Kamen Rider Oz-Gear
Getting the hang of this...
Posts: 5
Joined: Mon Jan 01, 2018 1:33 pm

3D Printing

Post by Kamen Rider Oz-Gear » Wed Jan 24, 2018 7:06 pm

For any of the cosplay events,

Are there any rules about 3D printing for cosplay?

User avatar
Determined Poster
Posts: 214
Joined: Wed Nov 25, 2015 8:10 pm

Re: 3D Printing

Post by Selestyl » Thu Jan 25, 2018 7:19 am

(As always, not staff) Do you mean for pieces of your costume or for props? For props, the general consensus seems to be “if you hit someone with your prop, will the person or the prop break first?”. I’m not sure how hefty 3D printed stuff is in that vein, so do consider that. What exactly are you looking to 3D print? It sounds super cool!
2019 Lineup:
Ignis Scientia, FFXV
Tressa Colzione, Octopath Traveler (accompanied by better half as Alfyn Greengrass, Octopath Traveler!)
Nobody told me no, so Nico-chan-senpai, Run With the Wind

User avatar
Veteran Poster
Posts: 172
Joined: Thu Apr 28, 2011 2:09 pm

Re: 3D Printing

Post by MandaTifa » Thu Jan 25, 2018 8:52 am

Again - nothing can be preapproved before the con, and Security will always have the final say. That said, I've seen 3D printing used for parts of costumes, or to create puzzle pieces to put together larger costume pieces. But individual pieces may be harder to pass security, especially if they have any sharp edges, or end up being super hefty. Something to keep in mind while thinking about your 3D print pattern.
Amanda Graves
Masquerade Staff 2012 - 2019
Attendee 2010-2011
Bakuretsu Con Staff 2009-2016, 2018

The Anime Boston Masquerade Staff Creed: "It's our job to panic so you don't have to."

"Be strong, Red XIII."

Post Reply